In the actual application of low-power monitoring equipment power supply system, many monitoring places cannot operate normally due to the fact that they cannot be connected to electricity all year round or the cost of connecting to electricity is high. The traditional solution is to use photovoltaic modules and lithium batteries as system power supply. After long-term use, the following problems are found:

1. The system is a series system, one node fails, and the system crashes.

2. The output voltage of the photovoltaic module fluctuates greatly, and the Mppt controller cannot achieve precise control, causing the lithium battery BMS system to start the protection mechanism, causing the battery to be unable to charge and discharge, causing the load equipment to be paralyzed and downtime.

3. The Mppt controller has no charge and discharge management function, the battery cannot reach the full state, and the battery discharge depth is not enough, resulting in a reduction in the battery life of the lithium battery.

4. Without an effective monitoring system, it is impossible to understand the working status of the power system in real time, and power failures cannot be handled and restored in time, reducing the customer experience.

Small PV-Storage Integrated Backup Power System

The small photovoltaic storage integrated backup power system is an intelligent low-power power supply system based on power generation, backup, monitoring, and remote control. It is mainly composed of photovoltaic modules, photovoltaic controllers, lithium batteries, inverters, gateways, intelligent circuit breakers, and load equipment.

Photovoltaic modules: devices that convert solar energy into
electrical energy with a conversion efficiency of 22.9% (Tongwei
Co., Ltd., Longi Green Energy, etc.)

Photovoltaic controller: based on the requirements of lithium
battery equalization and floating charge, it can automatically
adjust the output voltage to ensure the normal operation of
lithium battery charging and discharging

Lithium battery: select lithium batteries from well-known
manufacturers in the industry to ensure battery performance
(Guoxuan High-tech, Yiwei Lithium Energy, Tianjin Lishen, etc.)

Inverter: DC to AC equipment (Huawei, Jinlong, etc.)

Pure Photovoltaic Scenario

Light Stacking Scenario

Working principle: When the mains power supply is normal, the system uses the mains power to power the load equipment.

When the mains power fails, the photovoltaic power generation system is used for power supply. After the photovoltaic module generates electricity and is stepped up and stabilized by the photovoltaic controller, part of the electricity is directly connected to the inverter for DC to AC conversion for use by the load, and the other part is used to charge the lithium battery.

The photovoltaic controller has the function of lithium battery equalization charging and automatic floating charging switching to ensure that the battery will not activate the BMS protection function, thereby ensuring the normal operation of the lithium battery. At the same time, it can ensure the depth of each lithium battery charge and discharge, solving the problem of insufficient charging depth.

The system uses gateway equipment to upload real-time information such as current, voltage, power, and equipment status of the entire power system to the monitoring platform. The monitoring platform can remotely understand the system working status and provide alarm information in time if there are abnormal problems, which is conducive to problem handling and on-site management.

Remote monitoring

Through the monitoring platform, you can get real-time information about the photovoltaic controller, lithium battery output current, voltage, power and other parameters, and observe the equipment status at the same time.

Load remote control

With load remote timing and real-time shutdown control function

Photovoltaic Optimizer

solar power optimizer

Based on the requirements of lithium battery equalization and floating charge, the output voltage can be automatically adjusted to ensure normal charging and discharging of lithium batteries. View more

Connection mode

Series or parallel connection, if one node fails, it will not affect the normal operation of the system

High power photovoltaic modules

The photovoltaic module has a large power (630-710) Wp and a conversion efficiency of 22.9%. View more

48V Telecom Battery

It utilizes Fudi(BYD Brand) C47 1P16S lithium-ion battery cells. It offers exceptional safety, high energy density, long life, and excellent temperature characteristics. View more